Top 15 Best Skiing Headphones in 2019 – Complete Guide
Regardless of whether one is a seasoned skier or only a beginner learning to ski for fun, listening to one’s favorite music tracks while going downhill is certainly a lot more exhilarating as compared to hearing the hollow sounds produced by the gushing wind or the snow all the time. Skiers have to choose ski helmet headphones which go along with the ski helmet. With such headphones installed inside the helmet, the skier would get used to listening to music while skiing as if it is an essential part of this sport and not just something which the skier would want to do as an extra. Ski headphones are chosen on the basis of personal preference. One pair of ski headphones which is ideal for one person might not be suitable at all for the other. It depends a lot on the personal preferences of the skier. However, many different factors can be considered in trying to judge the quality of ski headphones.
Read our latest guide about the best bluetooth sports headphones.
Table of Contents
Benefits and Uses of Ski Headphones
Music Down the Hill
Every skier loves to have music pounding on his/her ears while going off-piste or doing chips down the mountain. It must, however, be noted that regular ski helmets cannot be used with headphones. The main purpose of a regular ski helmet is to protect the skier in case of a fall. Therefore, the skier has to rely on a bit of ingenuity to let the helmet accommodate the ski headphones. The type and the fit of the helmet would come into play in this respect. In case, the ski helmet has got a snug fit over the skier’s head, trying to fit the ski headphones in between this tight helmet and the head would cause pain to the skier. Therefore, ski headphones might not be the right choice in this case, and earbuds could do better. The earbuds enter the ear and do not come in between the helmet and the head.
Read our complete guide about the best motorcycle helmet headphones.
Ski Headphones Fit Better
The problem with the earbuds is that during vigorous action, they could fall off and the skier has to find another way to fit the ski headphones into the ski helmet. Many skiers try to purchase flat headphones which would occupy the least amount of space inside the helmet and not because discomfort associated with regular headphones. These are quite a few ski headphones which are flat, and they serve the purpose nicely.
Alternate Wearing Style
In case, a skier does not have the flat headphones available or does not have the possibility of buying these either can fit the regular ski headphones into the helmet. This can be done by wearing the headband part of the headphones at the back of the neck. They can be conveniently held in place by employing the chin strap of the ski helmet. This way, they would stay in place just fine unless the skier goes through a fall. In case, the skier does not find its way of holding the headphones, he/she can place them a little under the ears or perhaps even, behind his/her ears. The skier can find the best positioning with a bit of trial and error to get the most comfortable fit. At this point, it is worth mentioning that the skier needs to stay in touch with the ambient sounds, and therefore, these ski headphones should not cover the ears entirely.
Wireless Connectivity Down the Slopes
The skiers have the option of connecting wireless ski headphones to listen to his/her favorite tunes while going down the mountain. Bluetooth enabled ski headphones can be used for this purpose with the Bluetooth device also housed on the body of the skier. Bluetooth needs to be switched on both the device as well as the ski headphones to accomplish this. As soon as they are paired, wireless connectivity on the slopes would enable a joyful listening experience coupled with a wonderful ski ride. A lot of people prefer wireless headphones as they are a lot easier to manage. However, it is possible to use wired ski headphones as well. It is the level of personalized comfort, which is important.
Types of Ski Headphones
The ski headphones are more like precise speakers as the entire earpiece design is such that it is as slim and thin as possible. These have to be housed inside a helmet and therefore, needs to acquire as less space as possible. However, it is ensured that they do not make a compromise on either safety or comfort. The shape and size of the earpiece in these headphones is such that it does not cause any discomfort to the skier and still allows for high-quality sound output with a high degree of control over playback as well as the ability to answer or reject telephone calls.
Wired or Wireless
Majority of the ski headphones are wired, and this allows the skier a very joyful listening experience with a powerful sound. The music device can be safely stored inside the ski jacket to go along with the skier. The in-pocket is usually the best place to put it in. This allows the headphone wires to route through the inside of the clothing. This is very helpful while going down the slopes where tangling wires could prove dangerous. This way, the headphones ad the smart device does not slip off and fall into the snow underneath. Some people, however, prefer wireless types. They are Bluetooth enabled, and the device can be within the Bluetooth range. The user does get rid of tangling cables, but the wireless headphones can only run as long as they are charged. It is important to purchase ones who have rechargeable batteries.
Wrap Around Ski Headphones
These headphones are the most comfortable and provide a great sound output. However, with ski helmets, they do not fit well. If the ski helmet fits, these would not fit. In case, the skier falls, the headband could even lead to injuries. In case, one has to wear these, and the headband can be pushed behind the neck enabling a comfort fit.
In-Ear Ski Headphones
These are very light and compact. They go inside the ear and do not affect the comfort and the fit of the ski helmet. However, they can shut out all ambient sounds, which might be important for the skier and could lead to accidents. Three could also fall off easily, and the skier might need to frequently reinstall them in his/her ears.
Over-Ear Ski Headphones
These are indeed the most comfortable for skiers. They are equipped with either a hook or a loop which goes over and behind the skier’s ears to keep them in position. These can fit inside a ski helmet without even touching the ears of the skier. These ski headphones provide the best fitting design.
Features of Best Ski Headphones
Ease of Use
The best ski headphones would be very easy to use. Some allow the ability to answer calls while some do not. This helps a lot as the skier does not have to bring out the phone of he/she can answer a call from the headphones. Reaching out to controls easily is another good feature available with best ski headphones. Some can even be used while the skier has the gloves on. Wired ones usually have a knob for inline control over volume.
The best ski headphones provide very high-quality sound. They could be wired or wireless in terms of connectivity. AS a general rule, it is important for a skier to know what is going on around him/her when he/she gushes downhill. Therefore, it is important to get those ski headphones that deliver very powerful and rich sound but still allow ambient sounds to be heard. Normally open back designs allow for this to happen. In-ears ones would be the worst in this respect. Safety is the priority which the skier should focus
The weight of the best ski headphones would be light. They would require less frequent adjustments inside the ski helmet. Heavy headphones would cause a very tight and uncomfortable fit while the lighter ones are more comfortable.
A high degree of comfort is inherent in the best ski headphones. They fit well and do not cause discomfort, which could be distracting. The best way to ensure comfort while skiing is to take the helmet along at the time of purchasing the ski headphone and trying them on with the ski helmet.
The best ski headphones are water-resistant, waterproof, or sweat resistant. They are also very durable, not requiring frequent purchases. They can tolerate a few bumps here and there. They are equipped with high-quality cables and are sturdy enough to resist damage from tugging as well.
Top 15 Best Skiing Headphones in 2019
These ski headphones have been designed and constructed for use while skiing or riding a bike. These headphones are specifically designed to fit inside the ski helmet easily and give comfort to the skier while in use. They typically enhance the connection between the ride and the rider and bring out feelings of pleasure and joy while going through the pleasurable sport downhill. They amplify the sense of adventure and freedom and pump up the desire to win. They are popular across continents and have been crafted after developing expertise over the years.
Design and Materials
The ski headphones easily fit inside the snow or ski helmet and offer incredible sound quality for those skiers who love to jam out on the chairlift and love to be free of entangling cords. It fits perfectly elegantly inside the ski helmet allowing the skier to switch between the smartphone and the music seamlessly. This feature allows the skier to attend to calls. The perfect fit inside the ski helmet leads to pure listening pleasure and more fun skinning. It is designed by a company which has provided high technology products for over 30 years since Jim Gentes initiated the company. It enables a perfect ski ride which allows the skier the ability to listen to the ambient sounds as well.
The ski headphones provide 14 vents for internal channeling and contain Fit Kit Padding for a perfect fit inside the ski helmet. Pad kits are available in the aftermarkets as well. The ventilation is channeled at the brow line. The cheek pads are easily removable in emergencies. The audio speaker is compatible with Tuneups Helmet audio system. The Bluetooth wireless system from Chips boasts 1-touch controls and allow for easy to use and very convenient handsfree functionality. The headphones have got large 40 mm drivers, and it can run on a single charge for as long as 10 hours. They work quite well at low temperatures and have been proven to do at 20 degrees Fahrenheit.
- The ski headphones consist of large 40 mm drivers that give powerful and rich sound.
- The headphones can run for 10 hours on a single charge.
- The headphones fit nicely inside ski helmet.
- Some people face connectivity issues with these.
These headphones have been designed and constructed as universally compatible ski or snowboarding headphones which are compatible with most audio-reedy ski and snowboarding helmets. These include K2, Poc, smith, Wildhorn, Giro, Anon, Bolle, Burton, etc. The skier or the snowboard needs to ensure that the earpads are audio compatible and the Alta headphones would week. It contains a 3-button friendly and intuitive controls which are made available along with a built-in microphone.
Design and Materials
The headphones have been designed in Utah by snowboarders and skiers who were interested in having a trouble-free audio experience while skiing or snowboarding. With the help of these headphones, they no longer have to remove their smartphones from their coat pockets which hide the phone. These headphones have got one control button on the right side and two on the left side, which enables the athletes to easily control every function of the smartphone without taking off the helmet or the gloves. The tracks can be changed, the volume level adjusted, Siri or Google Voice could be activated, and music can be played or paused. Telephone calls can be placed or answered. The design is sweat-resistant and allows the headphones to work in very cold temperatures up to -20 degrees Fahrenheit.
The headphones are Bluetooth 5.0 enabled and use large 40 mm derivers to deliver a high-quality and powerful sound. The sound is balanced and dynamic, and the bass is very deep at all volume levels. Both sweat and dust ae repelled as the headphones carry an IP45 resistance earing. The playtime is 10 hours on a single charge. Their compact design enables quick adaptability to all types of snowboarding and ski helmets. The speakers are slid into the earpad audio sleeves, and the connecting cord is then run behind the padding at the back of the helmet. This prepares the athlete for an enjoyable listening experience down the slopes.
- The headphones are compatible with most ski and snowboarding helmets.
- The headphones are Bluetooth 5.0 enabled.
- They enable full-fledged control of the smartphone with only three buttons on the headphones.
- Some people find the cord to be too short.
- Some people face connection issues with these.
These headphones (audio + walkie-talkie system) has been designed and constructed as Bluetooth enabled a device which connects wirelessly with smart devices. These are dropped into the ski helmet, and the athlete can enjoy a myriad track throughout the day. The playtime is 10 hours on a single charge. The headphones provide full-fledged control over the phone and audio functions. They enable Siri and are now available with a push-to-talk walkie talkie as well. These can be easily used without taking the mittens off. The headphones require no wires inside the ski jacket for operation.
Design and Materials
The headphones provide multiple functionality and climate to separately carry an MP3 player, earbuds, smartphone, heated mittens, and walkie-talkie when a skier or the snowboarder ride to the local hill to ski or snowboard down the slopes. They have phones enable perfect helmet audio as they for aptly inside ad allow the smartphone to stay in the athlete’s pocket. In combination with an app, thee headphones work perfectly as a push-to-talk walkie-talkie. Thus, the items required by the skier to go skiing get reduced by amalgamation of such functionalities.
The headphones are equipped with large 40 mm drivers which enable a rich, powerful, and high-quality audio experience. The Bluetooth pairing is quick, and the wireless connectivity enables crisp and clear sound quality as well. The controls have got two buttons, which are both glove-friendly. They allow for the adjustment of volume levels and can play and pause music. The skier can also change tracks and answer calls. The built-in microphone allows for the use of Siri as a voice assistant. The headphones have got 10 hours playtime on a single charge. This enables the skier to use them literally throughout his/her skiing day. The headphones work till temperatures as low as -20°C. The controls perform perfectly even if the gloves are not removed. Different button combinations enable the skier to control the smartphone as well.
- The headphones allow for additional push to talk walkie talkie feature.
- The headphones eliminate the need to take the smartphone out of the pocket.
- The phosphors allow for controls without changing gloves.
- Some people find the walkie talkie feature redundant.
- Some people are not happy with its Bluetooth capability.
This Motorcycle 45mm Audio Set has been designed and constructed to deliver a whole new audio experience in a motorbike communication system which has been modified by mechanical experts, acousticians and software engineers from JBL which has been in engaged with these technologies for the last 70 years. The audio elements of this system have been enhanced to make these deliver a very joyful, pleasant, and powerful listening experience inside the helmet.
Design and Materials
The headphones overcome all the problems that are encountered during a motorcycle ride by the rider wearing the helmet in which this system is installed. The road, the engine, the wind as well as the differences in the types of the helmet contribute in making the functioning of this type of system quite difficult as they affect the frequencies which are heard by the rider. The system is designed diligently and constructed with high-quality materials to overcome all such issues and still deliver ease of use, powerful sound, and comfort inside the helmet to let the riders enjoy their rides to the utmost.
The 45 mm driver who has a large diameter, and that is why the sound output is very powerful, dynamic, rich, crisp, and enriched with a lot of details. The base of these drivers is 42 mm, which is just the right size to for most of the modern helmets and this makes the installation of these headphones into its place very easy. The system, once installed inside the helmet is very comfortable. It comes with 3.5 mm jack to connect to audio sources Those people who own a CARDO BACKTALK or FREECOM series can get the extra boost in sound quality due to the employment of the JBL sound processor as well as the firmware. The powerful components used in this system ensure that the rider gets the best possible sound and gets to enjoy it while riding.
- The headphone system can be easily installed in most helmets.
- The headphones have been modified by JBL.
- The headphones contain large 45 mm drivers.
- The headphones have a 42 mm driver base.
- Some people do not like the Velcro backing on the booth mic.
- Many people are not satisfied with the customer support.
These headphones have been designed and constructed as BE – LINK Bluetooth Sound System which delivers incredible and very powerful sound for the ski/snowboarder helmet of the skier or the snowboarder. The BE Headwear Bluetooth beanies and any helmet can be used with this system s it has Bluetooth enabled wireless connectivity. These include skate, full face, dirt, or any other helmet type regardless of the activity it is used for. It provides a high level of sound quality and boasts a unique style which is unmatched by any other system.
Design and Materials
In this world, most of the products are getting bigger as more and more features are added to them. They are also becoming brighter, and with time, most of the metallic components are getting replaced by plastic. These headphones are built differently as they are built to be used by humans and not robots. They are built with a design that enables the rider to ‘BE’ himself or herself. The BE Hardwear system has been built without using cords and provides high-quality, crisp, clear and rich sound to the rider
The BE Headwear Bluetooth Headset is provided to the skier or snowboarder with a Micro USB charge cord, BE-LINK System, DCV helmet hook & loop mounts; The system carries a lifetime limited warranty which covers defects due to materials and workmanship. The battery life is 10 hours while the system is in use and makes use of the technology with the help of the built-in microphone for hands-free calls. This is further acted by step by step voice prompts. The speakers have a large 30 mm diameter and the designing of the entire system is such that the unit is ultra-slim but very durable with origami acoustics.
- The headphones are designed to fit ski and snowboarder helmets.
- The sound output is powerful due to the use of 30mm drivers.
- The system uses Bluetooth connectivity.
- Some full-faced helmet users complain about access to controls.
These headphones have been designed and constructed for motorcycle helmets and have got a very long-range Bluetooth Intercom which has been specifically manufactured for use with motorbikes. These headphones are fully compatible with Bluetooth enabled smartphones and work very well with all full-face helmets as well as with most of the half-face ones. They boast the Bluetooth 3.0+EDR technology and perform the full-duplex operation. With these headphones 2 or 3 motorbike riders can very easily stay in touch with each other and 2 of them can simultaneously have a conversation.
Design and Materials
The headphones can be installed very easily in the motorbike helmet. They are also waterproof and serve the rider well in wet weather. They have a Hands-Free Profile (HFP) and Headset Profile (HSP) along with Audio Video Remote Control Profile (AVRCP). And the Advanced Audio Distribution Profile (A2DP) as well. The headphones carry ROHS, BQB, CE and FCC certifications and as such is very high quality. They have been subjected to very strict quality control, and inspection tests and the manufacturer has developed a mechanism which ensures that after-sales issues are also solved quickly.
These headphones work perfectly well up to such high motorbike speeds like 75 mph. They enable communication between 2 to 3 riders and 2 of them can directly communicate with each other. The headphones use Bluetooth technology for this purpose. The installation is done quickly without worrying about the weather as long as the receiver is positioned near the ears and the microphone near the mouth, the rider does not have to worry about any probable issues. The range of Bluetooth on these headphones is a high 1000 meters. Both noise cancelation technology, as well as DSP echo cancelation, are employed to improve speech and listening quality. The headphones deliver high-definition (HD) audio and allow the riders to listen to music and communicate with other riders. They can answer calls and use FM radio or GPS.
- The headphones allow motorbike rides to communicate and listen to music, etc.
- The headphones can be used with all full-face helmets and most half-face ones.
- The Bluetooth range is 1000 metes, which is very high.
- The headphones work well up to speeds of 76 mph.
- They deliver High-Definition (HD) audio.
- Some people state that at high speeds, telephone calls have clarity but not music.
- Some people feel they make the helmet tight.
These speakers work differently depending on how they are used with the motorcycle headsets using the Bluetooth wireless connectivity. The level of the volume would be directly dependent upon the headset used by the rider. It is important for the headset to have an adequate amount of power output to be able to drive these speakers. In case, the power is low, and it can lead to damage to the XSound 2.1 drivers. The manufacturer recommends the addition of their EAR3 mobile amp to the speaker and the headset combination. This addition would enable a very powerful and rich sound output.
Design and Materials
The XSound 2.1 design has got a clean matte-black finish, and the chassis is made out of rugged steel. . The speakers have been designed to work in tandem with iASUS throat mic headsets and mobile amplifier. They have also been tested on the same type of equipment which includes besides the above-mentioned item, other products such as the iASUS Stealth Bluetooth headset as well as portable music devices and smartphones. The speakers have a thickness of 0.5 inches, and their outside diameter is 1.8 inches. The right wire is 7.9 inches, and the left one is 15.8 inches. The speakers fit most of the available helmets, and these include HJC, Schuberth, Arai, Bell Shoei, Arai, etc. However, a bit of customization might be needed for perfect installation on these helmets. The installation can be carried out without the use of any tool kit. A Velcro mount kit is available, and the speaker covers are made out of foam.
The speakers provide a high-quality sound and have got an exceptional bass response. The range of output is full, and the cables are very durable and heavy-gauge. These speakers belong to the 3rd generation of speakers for the manufacturer and as such, portray the tremendous experience and craftsmanship. They provide a highly exceptional sound. The size of the drivers is 40 mm, and the maximum power output is 30 mW. The impedance is 32 ohms, and the frequency range lies between 20 Hz and 22 kHz. The sensitivity value is 125 dB for these speakers, and they weigh 1.2 ounces. They connect to iPhones, Android phones, motorbike communication systems as well as iASUS Concept throat microphones very easily. The sound is rich and covers the full range. The drivers measure 1.8 inches in diameter and 0.6 inches for left and right ear respectively along wit the Velcro installed. The cable made for iASUS throat microphone is 15.8 inches in length for the left ear and 7.9 inches in length for the right ear. The extension cable has got gold plated connectors, and its length is 40 inches.
- The speakers have 40mm drives.
- The speakers are compatible with rest if IASUS equipment.
- The headphones are quite easy to install in a helmet and might require only a little customization.
- They can be used at high speeds.
- Some parole thinks they are a bit too large and thus, uncomfortable.
These speakers provide an exceptional sound quality in the form of High definition (HD) audio and for the inside of all types of helmets. They can plug into the communication system of the helmets, and thus, they feature a type of universal fit for very easy and convenient to use installation. They fit many audio devices as well as smartphones and tablets as well. They use a 3.5 mm audio jack for this purpose. They proved a very high-quality bass; crisp sound and the overall music quality is unsurpassed. They can fit the helmets in a matter of minutes, and the ears get used to them quickly as well. The sound is clean, and the bass is indeed extreme.
Design and Materials
The speakers are designed in such a manner that after installation on one helmet, they can be very easily transferred to another. There is no requirement of any tools to accomplish this transfer from one helmet to another. They boast a gold-plated 3.5 mm standard audio jack, and the speakers get plugged into the communication system of most helmets quite easily. They also connect to many audio devices which have ports compatible with the 3.5 mm audio jack as well as to smartphones, laptops, tablets, etc. The package includes a speaker set along with an installation mount set.
The speakers provide high-fidelity sound and deliver a high level of performance in terms of helmet audio. The rider can stay connected to his/her music and also answer calls as he/she switches between a morning ride on the snowboard or ski to a motorbike ride. The changeover from one helmet t another is literally like a breeze. The speakers enable the riders to upgrade their audio experience by listening to the exceptional sound quality they provide. They are equipped with 40 mm drivers, and their impedance is 8 ohms. The sensitivity is high at 130 dB/mW ±3 dB. The frequency response is 20 Hz to 20 kHz, which is the audible range for human beings. The weight is 2.4 oz., and the speakers carry a limited warranty for one year, which covers defects due to materials and workmanship.
- The speakers can be easily transferred from one helmet to another.
- The speakers have got large 40 mm drivers.
- The speakers provide High definition audio.
- They are compatible with all audio devices which have a 3.5 mm audio port.
- Some people think they are not loud enough.
- Some people think the audio cable is too thin.
These headphones have been designed and constructed to fit helmets for skiing, motorbike riding, snowboarding, etc. and they have wireless connectivity via Bluetooth technology. The headphones boast superior signal transmission, high fidelity stereo music, ultra-low power consumption as well as speech clarity. The Bluetooth technology is 4.0, and it is coupled with EDR technology. The headphones are very easy to pair with smart devices like laptops, tablets, and smartphones, etc.
Design and Materials
The LeaningTech Wireless Motorcycle Helmet Headset has been designed as a multi-functional headphone, and it allows the music to be played back and paused. The volume can be increased or decreased, and the automatic call back feature is also enabled. There are many other features which can be controlled via the headphones. It is important for the biker or skier to first check the size of the helmet to ensure that the headphones will fit properly in the helmet. These might not work with tight and compact helmets.
The headphones use the Bluetooth 4.0 + EDR technology, and the frequencies they use are 2.4026 GHz ~ 2.480 GHz. The playtime on a single charge is 8 hours however, the standby time is 160 hours. The battery is a rechargeable 3.7V / 180mAh battery which takes only one hour to charge fully. The speakers have large 43 mm drivers with line length of 17.71 inches. The length from the microphone to the speaker is 5.9 inches. The thickness of the speaker is 0.6 inches. The package contains one motorcycle helmet headset and a user manual. With the help of the hands-free speaker, the rider does not need to hold the cell phone in hand while riding. He/she can press a button on the headset to either answer the call or to call back if needed.
- The headphones work with Bluetooth 4.0 + EDR technology.
- The headphones allow for playing/pausing the music, volume control, etc.
- The headphones allow the rider to answer telephone calls and even call back.
- The headphones get fully charged in just one hour.
- The headphones would not fit inside tight and compact helmets.
- Some people think it is not loud enough.
These headphones are ideally suited for motorbike riding and can be easily installed inside the motorcycle helmet due to their super-slim styling and compact size. The rider gets a superb wearing experience without feeling any discomfort. The headphones boast wireless Bluetooth connectivity and provide a powerful and enjoyable sound which is rich and clear. The earpiece in these headphones is as thin as the width of 3.5 one-dollar coins. The exact thickness is just 0.27 inches. It is slimmer than most headsets available in the market.
Design and Materials
The headphones are equipped with a very thin (0.27 inches) earpiece, which is a lot thinner than most products available in this category of headphones in the market. It is also very comfortable to wear and does not give any discomfort to the rider once installed inside the helmet. The headphones are very easy to install. They are set up using a hook&loop method and fit perfectly to the motorbike helmet. The whole installation procedure takes no more than a few minutes, and the maintenance is not time-consuming either
The control button close to the built-in microphone allows for answering or rejecting telephone calls. It allows the rider to end a call or dial back. It allows him/her to play and pause music and go to the next track. The volume can also be changed up or down. The playtime is up to 7 hours, and the battery is a 250mAh Li-ion battery which has been built into the headphones. The standby time is 70hours while the charging time is just one hour. The installation requires choosing a place inside the helmet to stick and use Velcro hook to do so. The loop part of the Velcro is placed at the back of the speaker. The headphones are then put in place, and the equipment is ready to go. The headphones are equipped with a CSR Bluetooth 4.0 chip which enables quick pairing and perfect communications.
- The headphones are Bluetooth 4.0 enabled for wireless connectivity.
- The headphones fit easily inside the helmet.
- The headphones have the thinnest earpiece available in the market.
- The headphones take a few minutes to install.
- Some rides think the sound is not loud enough for their liking.
These headphones use to provide wireless connectivity VI Bluetooth 4.0 version, which is more advanced as compared to the 3.0 version. It consumes less power as compared to the previous version and provides a more stable connection. The headphones can be charged in less than an hour. They can be operated in the ‘Power Saved mode’ which allows for shut down of the headphones after they stay idle for 5 minutes. This saves a lot of valuable playtimes. The headphones package includes the Motorcycle Bluetooth headset, a USB charging cable, and a user manual.
Design and Materials
These headphones are small in size and can be easily fitted inside a motorcycle helmet. The rider can enjoy his/her favorite music tracks as a result of the slim design in a very comfortable manner as the headphones do not cause any discomfort once properly installed. The headphones are designed to include a hands-free for the rider to be able to ride safely while answering calls or playing or pausing music, etc. The battery in the headphones is a rechargeable Li-ion battery with 6-hour playtime and 160 hours of standby time. It takes less than an hour to get it to full charge.
The headphones use Bluetooth 4.0 technology to wirelessly connect to the music source, which could be any smart device like a cell phone, tablet, etc. The rider gets a crystal clear and powerful sound making his/her ride very much enjoyable and pleasurable. The headphones also employ noise reduction and allow the rider to focus better on the headphone audio, whether it is music or telephonic conversation. It enables power level display on iPhones, and the rider gets to know easily whether it is charged or not. It also gives sound reminders. The speakers in the headset are Hi-Fi. The Bluetooth 4.0 technology also contributes to the long playtime as it consumes less power as compared to the 3.0 version.
- The headphones use Bluetooth 4.0 technology for wireless connectivity.
- The headphones are small in size and fit inside the helmet easily.
- The headphones have got sound reminders.
- They enable power level indicating on iPhones.
- Some people think they are not loud enough.
These headphones have been designed and constructed as high-quality Bluetooth enabled headphones which provide easy pairing and a stable wireless connection. The sound produced by these headphones is clear, and the basis exceptionally good. They have features for noise cancelation and provide the rider with a joyful music listening experience while on the road. These se designed for use with motorcycle helmets and get installed easily inside them. The rider enjoys the headphone audio without any discomfort.
Design and Materials
The headphones design enables installation inside a motorcycle helmet, and a clear and stable connection is established between any smart device like a tablet or smartphones over Bluetooth wirelessly. The headsets can also be used separately. However, it is more comfortable to get them installed into the helmet for a more worry-free and joyful music listening experience. The rider can answer or reject telephone calls, voice dial, play or pause music and jump to the next track easily via controls on the headphones. The volume can also be increased or decreased similarly. The package contains a helmet headset, four headphone Velcro, one USB cable and an instruction manual.
The headphones provide the rider with Hi-Fi audio functionality and the ability to wirelessly connect to smart devices via Bluetooth. The rider gets his/her hands-free, and thus, the safety of the rider is fully guaranteed while using these headphones and listening to music or answering telephone calls. The headphones can connect to 2 smartphones at the same time. The playback of the music gets suspended when interrupted by an incoming call and resumes automatically as the call conversation is over and the caller hangs up. The Bluetooth version is 4.1 EDR, and the battery has a capacity of 180mAh. The playtime for the headsets is 6 hours while the standby time is 160 hours. The battery takes only one hour to charge fully. The range of the Bluetooth is 33 feet, and the frequency is 2.402 GHz to 2.480 GHz.
- The headphones use Bluetooth 4.1 EDR technology.
- The headphones charge up in only one hour.
- The playtime of these headphones is 6 hours.
- The headphones fit easily inside a motorcycle helmet.
- Some riders think they do not have deep bass.
These E-Bro 3.5mm Motorcycle Helmet Speaker Headphones are designed and constructed to serve motorbike riders for entertainment and music. They connect with a cable to the MP3 player who is housed on the body of the rider or the motorbike. These are a great pair of helmet speakers for riders when they are on the roads and want to enjoy their favorite tracks without being bothered by the noise around them. The headphones do not boast wireless Bluetooth connectivity but require an audio cable to connect the MP3 player to the headphones.
Design and Materials
The E-Bro 3.5mm Motorcycle Helmet Speaker Headphones have been designed as very soft pair of speakers which are meant to be fitted inside the motorcycle helmet. The installation is quite simple and is done by using Velcro pads. These pads are included in the package to facilitate quick installation. The cable is extra-long and connects to the headphones via a 3.5 mm jack. Therefore, in case, a longer extension required, the rider has the option of adding an extension audio cord. As the headset does not connect wirelessly, the rider needs to ensure that the music device is positioned in such a manner that it does not cause the cable to get entangled with the body of the rider while riding the bike.
These headphones provide full control over the volume of the music playback using a 3.5 mm jack to connect to the music device or te MP3 player. The length of the cord which is provided is 36 inches. However, the rider has the option of adding another audio cable extension to increase the overall length of the audio cord. The cable extension length is 37 inches. Therefore, the total length of the cable can go up to77 inches, which is more than sufficient for use on a bike. The package contains two speakers, and the size of the product is 5.8cm x 5.8cm. The package contains one motorcycle speaker headphones. The weight of this product is 0.02 lbs.
- The headphones connect to an MP3 player or other music devices via a 3.5 mm jack and an audio cord.
- The audio connection cable allows for an extension to be added to increase the cable length.
- The headphones provide crystal clear and powerful sound.
- The headphones are very easy to install inside a motorcycle helmet.
- The headphones do not have wireless connectivity.
- Some riders think they are not loud enough.
These headphones connect wirelessly with Bluetooth enabled devices and uses Bluetooth 4.1 technology, which is superior to the previous Bluetooth versions as it consumes less power and provides a more stable connection. The headphones can connect to tablets, smartphones, laptops, etc. They can easily be installed on most modular (flip-up) helmet, open-face helmets as well as Off-Road (Motocross) helmets. The rider can answer calls by saying a ‘Hello’ voice command or press a button on the headphones to answer the call. Thus, they allow a high degree of control over communications as well.
Design and Materials
The headphones have been designed in such a manner that they enable a very easy and quick installation inside the motorcycle helmets. The rider is required to stick a loop on the backside of the headphone and then stick a hook inside the motorcycle helmet near a position close to the ear. The headphones can then be stuck to the loop. With such simple procedure, the installation is complete. The calls can be answered via voice command or by pressing a button. Short pressing the button twice would reject the call. The rider can place a call by short pressing just once to activate voice dialing.
The headphones are easily paired with Bluetooth enabled devices by long-pressing the M1 headset button. The version of Bluetooth technology used in these headphones is 4.1. The working distance has to be within a range of 33 feet as that is the maximum Bluetooth range permissible for these headphones. The weight of the headphones is just 50 grams. They use a Lithium battery with a capacity：of 125mAH, and it provides up to 7 hours of talk time and a music playtime of 6 hours. The standby time is 144 hours. The speakers use large 43 mm drivers, and the thickness of the earpieces is just 0.3 inches which are quite slim. The package includes a headset, 2 Hook and Loop pairs, one extra microphone sponge and a user manual. M1 can provide intercom with M1-Pro only. M1-pro is purchased separately. The microphone and the mouthpiece are connected by iron while many other products use plastics. These headphones are very durable, as a result.
- The headphones can intercom withM1-pro.
- The headphones fit inside the helmet very easily.
- The headset provides wireless connectivity within 33 feet.
- The headphones are very durable.
- Some riders state that the volume is not loud enough at high speeds.
These headphones are widely compatible with all types of Bluetooth enabled smartphones as well as tablets. They also connect to laptops, and other Bluetooth enabled devices. The package contains the headset along with a USB charging cable. These can be easily fitted inside a motorcycle or a bicycle helmet. The rider or the biker can easily enjoy his/her favorite music tracks safely and at the same time has the capability to answer telephone calls. These headphones are perfect as gifts to family or friends.
Design and Materials
These headphones are designed with advanced noise reduction cancelation and windproof technology and allow the rider a high degree of control over bot the music and the communication. The rider does not have to hold the cell phone in his/her hands and can easily use the button on the headphones to answer telephone calls or to dial back automatically. The rider can also play and pause music, move over to the next track or raise or lower the volume using the button. The on-board battery is a rechargeable Li-Ion battery which has a long standby time of 160 hours. The headphones also enable the rider to set sound reminders.
The headphones are Bluetooth 5.0 EDR enabled, and this allows for a lot of power-saving and quick, easy and stable connectivity with smart devices. The range of the Bluetooth is 33 feet. The battery which has a capacity of 180mAh charges up in only one hour. The speakers have got 43 mm drivers, and the frequency is 2.4026 GHz ~ 2.480 GHz. The line length of the speakers is 17.71 inches, and the length from the microphone to the speakers is 5.9 inches. The thickness of the speakers is just 0.6 inches which are not very thin but still small enough t fit inside the motorcycle helmets quite easily.
- The headphones are Bluetooth 5.0 EDR enabled.
- The headphones fit easily into motorcycle and bicycle helmets.
- The headphones have got 43 mm, large drivers.
- The headphones enable a high degree of control over payback and telephone calls.
- Some people face pairing issues with their phones.